2014-04-08

Zebra letting me down, again

I am sorry to report that once again Zebra are letting me down. I have to seriously look in to alternative printers than can actually print edge to edge on SIM cards (which are not as smooth as typical cards). The Zebra ZXP8 is one of those that can because it is a retransfer printer. Surely some other manufacturer must make one that can cope?

To recap the previous fiasco briefly: I ordered a printer with a smart card "contact station" and it took them 5 months to explain that this does not actually do anything and recommend I paid for a "mifare and smart card encoder". It turns out that this does not in fact do what we want anyway, i.e. does not work over Ethernet (having got an Ethernet connected printer for a reason). They did, eventually, put the contact station back and I used a Raspberry PI and USB card reader linked to the contact station. The marketing was bad, the support was worse until I started blogging and tweeting. Eventually they sorted it and were very apologetic. I hoped that was the end of problems.

But the saga continues. Up until they took the printer to make these changes it worked very reliably - we had been using it for 5 months, but now it started being unreliable, reporting "card jam" with the card just sat in the middle of the printer ready to print. It was getting more and more unreliable making it very difficult to get SIMs printed without several attempts each.

It took several days to get a reply, but once again Jim from their technical support department was helpful with things to try, and after I confirmed it breaks with plain white Zebra cards using the test card print (see video) he said he would get someone from their on-site technical support to call me today (Monday). It did not happen in spite of several chasing emails. Shame.

To add insult to injury, every time I email their support people I get  an automated response confirming the email arrived (usually several hours after sent) that says their target response time is 4 hours!

Does anyone know of a printer that can do what this one does?

And sorry Zebra, but you still need to improve things. I don't like to be a nuisance customer, honest, but if blogging and tweeting is the only way to make a company jump, that is what has to happen.

Update: Zebra did come out today (Wednesday) and as always when I do get hold of someone they are helpful and polite. They did find a loose connector, and all was well with lots of cards printed - until he was about to drive off and it went again. More bits changed and fingers crossed, massively more reliable than before, so may be OK now - but if not they'll strip it down and fix it for me and I have some direct contacts. Thanks guys.

7 comments:

  1. You could try:
    http://www.thebarcodewarehouse.co.uk/id-card-printers/high-security-retransfer/Datacard-SR200/

    When I say try, try and get a demo unit sent out. You'll find most companies will, if the product is of high enough value.

    ReplyDelete
  2. If I had read your post properly, this maybe more suitable:
    http://www.thebarcodewarehouse.co.uk/id-card-printers/high-security-retransfer/Datacard-SR300/

    Just to add, we've also given up on our Zebra card printer!

    ReplyDelete
  3. Do your SIP2SIM customers give a toss whether it's printed or not? Personally I don't care what's on the SIM, since it'll never be seen once installed anyway.

    ReplyDelete
    Replies
    1. Some people want branding on the SIMs, and we use the printer to read in the ICCID and load in the SIMs on to clueless on the right account, print the account number on the SIMs so we can ensure they go to the right place. Yes, it can be done without printing if necessary, and we have done this when the printer has not been working for extended periods.

      Delete
    2. For what it's worth, I'd rather have a blank SIM than one that's been printed with anything - make it easier to resell without having to worry about whether there is an A&A logo or my logo. As for the rest of the card, they go straight in the bin anyway. What would be far more useful is having the ability to customise the network ID ('Chameleon UK' by default, I believe) ourselves.

      Delete
    3. Well, we can set up so that when you order you get your logo not an A&A logo, and your branding on the back and a choice of fronts too.

      Delete
  4. OK, that's the first time I can remember seeing someone use lose and loose wrongly _that_ way round!

    ReplyDelete

Comments are moderated purely to filter out obvious spam, but it means they may not show immediately.

Hot tubbing...

I have a hot tub, it came with the house over 3 years ago. Managing a hot tub is complicated, and expensive. The expensive part is the power...