The holes are 1.5mm diameter.
Some high resolution images...
[printed using ColorFabb nGen on a Lulzbot TAZ 6 with 0.5mm hot end at 200µm layers]
2017-02-27
Engineering precision?
Printing more slowly, especially the first layer, can allow some improvements in quality. I printed this part for someone at the office, and you can see how it is made in more detail. Perhaps interesting for this that have not looked closely at 3D printing before.
The holes are 1.5mm diameter.
Some high resolution images...
[printed using ColorFabb nGen on a Lulzbot TAZ 6 with 0.5mm hot end at 200µm layers]
The holes are 1.5mm diameter.
Some high resolution images...
[printed using ColorFabb nGen on a Lulzbot TAZ 6 with 0.5mm hot end at 200µm layers]
Subscribe to:
Post Comments (Atom)
Updated regulator
I do a lot of circuits, and they all use the same basic design for power supply. OK, technically not quite, I have one for battery and one f...
-
Broadband services are a wonderful innovation of our time, using multiple frequency bands (hence the name) to carry signals over wires (us... -
For many years I used a small stand-alone air-conditioning unit in my study (the box room in the house) and I even had a hole in the wall fo... -
This is an appeal for (sensible) comments. I am working on revised A&A tariffs for broadband. For those that are not sure how they wor...
Have you ever tried printing threads?
ReplyDelete