And another board, just works.
One of the designs I made a while ago was a very small "generic" ESP32-WROOM-32 module. It had a 6 pin connector (normally a SPOX 2.5mm, but can be 0.1" headers). It was GND and 5 GPIO pins. It really was tiny, and has proved very useful.
But occasionally I need more pins, and a full size general dev board is much more bulky.
So I made a Mk2 that is a bit bigger. 2x8 pins, all of which can be GPIO. By default one each side is GND, and the next ones can be linked to DC supply or 3.3V. 6 of the 8 have BAV99 diodes for ESD protection as well. The whole thing can be powered from DC contacts (4V-40V) or a USB-C lead. The USB does serial to make easy to load code, and there is an RGB LED as well.
It is still pretty small, but a bit more useful.