2021-02-19

Internet in Wales

Having moved house, the Internet access was obviously going to be, err, "fun". It has gone through several stages...

What was meant to happen...

The first thing to realise is that we are not new to this - I mean, I do run an ISP after all. We know that phone lines, broadband, and fibre can take time to install. I have one of the best teams in the industry when it comes to dealing with BT, and they were on the case from the day we made the offer.

Fibre installs can take a lot of time, and need a survey, so I was happy to pay for the survey and get the fibre ordered months before we even exchanged. I had already looked around and worked out there was ducting, which even cut the corner of the property, so even a "dig" would not have been much work. As it happens the survey said overhead as they now use fibre cable not fibre tube (more on that in another blog). This means no excess charges, and no extra delays (in theory). So the fibre order went ahead. Basically, if we did not buy for some reason, we could cancel without too much cost involved, but ordering early would mean a good chance of fibre when we move in, or shortly after.

However, knowing the possibility of delays, phone lines were also ordered for broadband. The phone line(s) appointment was then set up for the day we exchanged, which is when the previous owners would allow BT access to install (previous BT access to survey had been done). At the last minute, BT cancelled that appointment due to "system problems". Several more appointments agreed and cancelled in the two weeks before we completed. All "system problems".

At one point a BT engineer did arrive to put in two phone lines, and got to the loft, and said that there was an existing service there (previous owner's) and so he was not allowed to install. The idea is that BT had just announced delayed appointments for any new install where there was already a service due to COVID, but this (a) was not to affect existing orders like this one, and (b) was to avoid BT engineers in people's homes - yet this engineer was already there. All he had to do was fit the sockets on the spare pairs, but no! He spent way more time in the house than he needed because he was on the phone arguing the toss with Ben at my office!

Several more cancelled appointments, and, well, read on. Suffice to say we did not have even DSL when we moved in, in spite of months of planning. The following stages happened over the first week or so - improving Internet almost day by day.

Flaky mobile

Day 1 was hectic, and all we had was mobile with 1 bar signal if you stand in the right part of the house.

4G dongle + small AP

We then progressed to a set up with a 4G dongle hanging out of a window connected to a FireBrick and a single Apple AP. This allowed WiFi in some of the house, with maybe 1Mb/s and lots of latency, but it was progress. This was a set up we had ready as a starting point.

4G dongle + better APs

They next step was where we get proper WiFi in the house. The FireBrick and dongle in the loft, but working out where to put the APs. Running network cables and a PoE switch, we worked out we can actually cover the whole house (inside) with 2 APs - one for North and one for South. This is because the house is essentially built in two parts and so has a thick stone wall across the middle.

Thankfully we have the services of JLP Property Management (son-in-law) to help, and run the cables in the walls. All neat any tidy, though the APs were hanging from a wire on the wall, we had good WiFi coverage.

The FireBrick and dongle and PoE switch were all set up in the loft, and worked a bit better than just dangling out of a window.

1 ADSL

Finally, after 3 days, we get an ADSL line, a whole 16Mb/s down and 1Mb/s up. Yes, ADSL not VDSL. It seems there is a cab, but it is full, and so on a waiting list!

This arrived at the same time as the fibre engineers! Yes, ordering a proper fibre install, and PSTN, months in advance and the fibre guys turn up at the same time! You would not believe it. However the fibre install cannot be completed as someone has fenced off some scaffolding around a BT chamber by the market in town. Arrrg!

Even so, on one ADSL we have progress. I started the work to sort out my proper IP addresses making my life a lot easier. I also got a small 19" rack for the loft, as you do.

Wired Internet

Next step was getting some wired Internet to some places in the house. Thankfully, and very luckily, we found the four phone sockets in the building were done using network cabling, so we could trace them, change the ends, and get network to some places. The front room TV/SkyQ/AppleTV could all now be wired in.

1½ ADSL

Next was the second PSTN/ADSL line. Obviously this was expected to be 16Mb/s too. But no! There was an underground fault, so only 6Mb/s.

The engineer took all day and gave up, said the underground team would sort in the morning. Even the escalation team at BT said next morning, but no, magically that was cancelled, and so not done.

I did however release a change to the FireBrick to allow it to adjust uplink speed based on speed data sent from the ISP end (which we now do on A&A lines) to allow uplink bonding to work better.

Another AP

The internal APs were fitted to the wall with some 3D printed brackets (once I found, and unpacked, the printer). Given the rather thick stone walls, an external AP was installed to cover the garden. We are now all properly set up with nice roaming WiFi throughout the house and garden, all connected to ADSL lines!

It actually looks like an external AP one side of the house is no use the other side even, the thick walls mean no WiFi even just outside the house. Oh well, another AP needed.

2 ADSL

BT finally fixed the second ADSL line. We have now put in the queue for a VDSL upgrade.

It took 6 days to get around to it, but the second ADSL is 15Mb/s (first now 14Mb/s), bonded. Sadly they are aluminium wires through...

Unfortunately they are far from perfect - seems some backhaul congestion, so a lot of jiggling line rates, forcing VoIP over just one line. And avoiding someone trying to use Disney+ during the day while we work.

Fibre

BT finally arranged access to their chamber. The fibre is 1Gb/s but will be only 90Mb/s backhaul for now. Even so, this should be a very reliable and low latency 90Mb/s, and is 90Mb/s up and down. Finally some decent internet, but with ADSL fallback, well, except...

The fibre, once installed and tested, should be provisioned. This is usually that day, or maybe at worst a day later. However, that was Thursday... If not for the scaffolding, it would have been Monday 1st.

Come the following Tuesday they finally say there is some connectivity issue, and suggest it is a "simple fix reversing the fibres between the patch panel and the ADVA", but they won't do that until the next day!

By Wednesday they had done a "hand over" of the Etherway - i.e. the fibre to the exchange was complete, but somehow the actual circuit back to London was not. As usual BT insist we wait, this time 2 days, and we know that nothing will actually happen during those two days, so we have to chase again on Friday. And, of course, we were right, nothing happened for 2 days. Now on to Friday we are told they have an issue with the VLAN tag!

And no, nothing happened on Friday, so nothing will happen until Monday now, in spite of all my efforts to escalate.

We are in to the third week after the engineers came and put fibre in, and we have issues like this: "The system identified a HSMDA port for this circuit and HE services are not supported on HSMDA cards, it was routed to 20347789:4/2 which is of the type ALN - HS-MDA (V2)" - yes I managed to get someone to tell me what was actually happening. Still no working fibre link though... "this will also involve a truck roll to get engineer to re-cable".

Apparently, I am now told (17th) that they should have it all working on Friday (19th). We'll see...

Friday 19th - updates during the day - by 4pm the new Etherway and Etherflow orders in place, so just waiting for something to happen. Should be "today" apparently. Remember, they installed on 1st, which would normally be the day it is live.

Finally 19:22, BT say the link is live and end to end tested and ready - except it does not work. They claim not to be any to see my kit on the line. Tried fibre and copper ports, and yep, comes up 1Gb/s on fibre port as expected, but still no joy. Arrrg!

OK, took me half an hour, but I checked the SFPs, and a simple mismatch, but I had a wired SFP/SFP cable which just worked - sorted and finally working. The SFP mix up was never going to work, but that did only waste half an hour...

Faster fibre

We will be upgrading the fibre to 1Gb/s as soon as we have a new 10Gb/s back end installed in London. We'll also have a nice shiny new FireBrick FB9000 prototype on the end of it really soon. These will take a bit longer, so more on that later.

12 comments:

  1. Reminds me of the sort of story Jerry Pournelle used to tell in Byte Magazine, where he had large teams of support people on call to get anything working at his home.

    ReplyDelete
    Replies
    1. Yeah. The difference is, those stories mostly made me think Jerry Pournelle was an entitled and not terribly competent dick. This story makes me think RevK is competent and BT are an organizational disaster area that, if they didn't have a natural monopoly, would have been outcompeted into the ground long ago.

      Delete
    2. The team at A&A work just as hard for any customer.

      Delete
  2. Painful! And people wonder why monopolies are bad (private or public)..!

    ReplyDelete
  3. Thanks for sorting the Firebrick to pick up the uplink speed, will be really useful for us line bonders.

    Sorry to hear of your troubles with BT, the thought that comes to mind that if someone like yourself, with the full weight of the A&A team behind you, struggles then us mere mortals are screwed.

    ReplyDelete
  4. Can you say more about the Fibre Ethernet ? So, you ordered a 1 Gbps leased line but you only got a 90 Mbps leased line - is that right? Can that even happen as I thought the whole point of Ethernet is that it is guaranteed end-to-end.

    ReplyDelete
    Replies
    1. 1 Gb/s Etherway (i.e. 1Gb/s to exchange), and then a 90Mb/s (for now) Etherflow from the exchange to London, where it is then in to a 1Gb/s Etherway (soon to be upgraded to 10Gb/s). End to end service is 90Mb/s Ethernet (for now).

      Delete
    2. Thanks. Who chose to restrict it to 90 Mbps and why? You or Openreach?

      Delete
    3. Most we have capacity on the 1Gb/s etherway at our end, until we get a new 10Gb/s one in.

      Delete
  5. So does this mean A&A might be offering more BT ethernet products soon? I notice you are only offering a TalkTalk option in my area right now?

    ReplyDelete
    Replies
    1. The prices seem to be improving, probably because of competition, so quite possible. If you want an etherway/etherflow quite just ask sales, as we can do them and we are upgrading capacity at the head end.

      Delete
  6. This just sums up the face melting frustration of experience I often get with OpenReach. It doesn't matter how straight forward the install or repair should be in reality. It's like they spend more time conjuring up new ways to get in the way of proividing a decent, expedient, refreshing service than delivering on the service itself. There are some brilliant OR engineers out there who've bent over backwards for me to get a job done, but sadly I've come across far more who seem to avoid anything that looks like work. Not to mention those in Head Office that seem to relish a good cockup on a job. I take confort in all the alternative providers that have been moving into our area and so far doing a pretty decent job providing better connectivity at competetive prices and with so little fuss that I now recommend those over OR based products if available. Would A&A consider gettin in with the likes of https://www.fullfibre.co/ or other Alt providers to resel their infrastructure or produce one of your own.

    ReplyDelete

Comments are moderated purely to filter out obvious spam, but it means they may not show immediately.

Hot tubbing...

I have a hot tub, it came with the house over 3 years ago. Managing a hot tub is complicated, and expensive. The expensive part is the power...