2011-06-06

TARDIS

OK, it is just about possible.

This one took five and a half hours, and went slightly wrong after around five hours so a slightly off effect near the top.

But printing for that long means I have managed to solve most of the problems I think.

I'll try again when I get blue plastic.

Obviously this is a scale model - well the outside is to scale, if I tried to do the in-fill to scale I would need a lot more plastic :-)
at

1 comment:

  1. Andrew MurphyMonday 6 June 2011 at 15:28:00 BST

    Whatever you do, don't try and print the inside!

    There isn't enough plastic in the universe...

    Also, have you thought about this?

    http://blog.makezine.com/archive/2011/06/3d-printed-house-keys.html

    ReplyDelete

Comments are moderated purely to filter out obvious spam, but it means they may not show immediately.

Subscribe to: Post Comments (Atom)

Is it spring yet?

This is more like it, but is only one day! Most of our import (and today it is likely all of our import) was 2am to 5am at 14.71p. Most expo...

  • It's official, ADSL works over wet string
    Broadband services are a wonderful innovation of our time, using multiple frequency  bands  (hence the name) to carry signals over wires (us...
  • Air conditioning at home (planning permission!)
    For many years I used a small stand-alone air-conditioning unit in my study (the box room in the house) and I even had a hole in the wall fo...
  • EICAR test QR
    It seems there is something of a standard test string for anti virus ( wikipedia has more on this). The idea is that systems that look fo...